ZB-F、ZB-K系列釜底泵

ZB-F、ZB-K系列釜底泵
 

ZB-F、ZB-K系列釜底泵主要用于输送真空反应器中的中高粘度的介质，吸入口大法兰设计，在真空条件下能使高粘度介质顺利吸入。主要应用于ABS,PS,PMMA,PBT,PT等介质。
 

　　泵体: 不锈钢

　　齿轮: M2钢,其他材料可指定。

　　滑动轴承: 高温工具钢，不锈钢。

　　轴封: 填料密封

　　加热系统 : 热媒加热 导热油 （K系列电加热）

　　规格/流量范围: 从0.5CC - 2500CC,  0.5cm3/rev - 2500cm3/rev
 

　　粘度: ≤40000 Pas

　　温度: ≤400℃

　　清洗温度: ≤450℃

　　进口压力: 最高可达12MPa

　　最高压差: 可达25MPa
 

　　ZB-F or ZB-K series melt pump is mainly used for transporting medium or high viscosity medium out of the vacuum reaction kettle. On basis of large suction inlet flange design, the high viscosity medium is able to absorb inside under vacuum conditions. This series of melt pump is primarily applicable for ABS, PS, PMMA, PBT, PT, etc.
 

　　Material for Melt Pump Body:Stainless Steel

　　Material for Gear: M2 Steel (Optional)

　　Material for Sliding Bearing: High Temperature Tool Steel or Stainless Steel

　　Shaft Sealing: Packing Sealing

　　Heating System: Heating Medium or Conduction Oil (ZB-K series melt pump adopts electrical heating.)

　　Model/Flow Range: 0.5CC - 2500CC, 0.5cm3/rev - 2500cm3/rev
 

　　Viscosity: ≤40000 Pas

　　Working Temperature: ≤400℃

　　Cleaning Temperature: ≤450℃

　　Inlet Pressure: ≤12MPa

　　Differential Pressure: ≤25MPa